2016年7月27日星期三
UPA USB Programmer V1.3
ECU Chip Tunning Tools UPA USB Programmer V1.3 with Full Adapters http://www.obdiifactory.com/Products/ECUChipTunningToolsU.html
ECU Chip Tunning Tools UPA USB Programmer V1.3 with Full Adapters
ECU Chip Tunning Tools UPA USB Programmer V1.3 with Full Adapters
Functions:
+ Added MC9S12HY64/HA32 support
+ Added Serial Flash memory support: A25L512/010/020/040/080/016/032, SST25VF512A/010A/020B/040B/080B/016B/032B, S25FL004A/008A/016A/032A/064A
+ Added 24C1024, 24C1025 support
+ Added Bulk erase data memory to PICs 16F913-7/946, 12F629/675
+ Added script function Get Page
+ Added script function Auto Baud Rate Device (hc08 devices only)
+ Added script function Get Programmer Frame Child Ctrl( A Child Ctrl Name: string): T Control
+ Added script function Enable Pic Memory Areas( A Program, AID, A Config, A Calibration, AEEPROM: boolean ): boolean;
+ Fixed bug with script functions Program Device, Read Device ... when used with PICs +Fixed bug with Set HC08 Security Bytes (Sec Bytes: string) function
+ Fixed bug with 68hc11 reading if Oscillator is not set to Auto
+ The software is digitally signed
+ USB driver upausb.sys is digitally signed and can be used with 64-bit windows XP/Vista/7
Specifacations:
Voltage: 12V
Power: 24W
Certification: CE, SGS
Applicable Models: Most Car UPA Full 25 adapter
Warranty: 1 Years
Color; photo color
Weight: 0.6KG UPA Full 25 adapter
Style: programmer with full adapters
Version: upa usb serial programmer with full adapters V1.3
2016年7月25日星期一
ELM 327 1.5V USB CAN-BUS Scanner ELM327 Software, With the actual software for 1.3
Skype: autodiag.tech
Email: Sales@autodiagtech.com
Description:
OBD-II Software for ELM327 USB is a free program that allows you to use your PC and a hardware interface to get the information from your car's computer.
The program is very user-friendly, and easy to learn. It is also very easy to install: simply extract the files into a folder on your computer's hard drive, and you're ready to go. To uninstall the program, simply delete the entire contents of the folder where the program resides.
The software supports two platforms - DOS and Windows.
Functions:
The program lets you perform the following operations:
1.Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).
2.Clear trouble codes and turn off the MIL ("Check Engine" light)
3.Display current sensor data, including:
4.Engine RPM
5.Calculated Load Value
6.Coolant Temperature
7.Fuel System Status
8.Vehicle Speed
9.Short Term Fuel Trim
10.Long Term Fuel Trim
11.Intake Manifold Pressure
12.Timing Advance
13.Intake Air Temperature
14.Air Flow Rate
15.Absolute Throttle Position
16.Oxygen sensor voltages/associated short term fuel trims
17.Fuel System status
18.Fuel Pressure
Specification:
Processor | ELM327 USB |
OBD-II Protocols |
ISO15765-4 (CAN)
ISO14230-4 (KWP2000)
ISO9141-2
J1850 VPW
J1850 PWM
|
Output protocol | RS232 |
Baud rate | 9600 or 38400 |
Indicator LEDs | OBD Tx/Rx, RS232 Tx/Rx, Power |
Operating voltage | 12V, internal protection from short circuits/overvoltages |
Nominal idle current | 45 mA |
订阅:
博文 (Atom)